TRANSFERS

(1) Select the design you want and separate it from the rest of the designs on the tattoo sheet (cut it out with scissors).

(2) Clean the area of skin where you want to apply the design with Isopropyl rubbing alcohol (70%) which is available at most chemists.

(3) Place the tattoo on the slightly damp skin (from alcohol) ink side down and dab the back of the paper with an alcohol saturated cotton pad until design shows through.

(4) Alternate patting and pressing the back of the design to "transfer" the design from the paper to the skin.

(5) Alternate and repeat steps 3 & 4 several times (tip: do not let the transfer paper dry or it will stick to the skin).

(6) Lift paper (while still wet) away from the skin and voila, you have a black ink tattoo (tip: peel away an edge of the paper to see if the ink has transferred to the skin, if not, lay it back down and repeat step 5 until ink fully transfers).

If you want color in your design, paint those areas in with Body Colors.

Dust both color and black designs with ordinary talcum (baby) powder to set the ink on the skin and give it a "true tattoo look."